Flooring Systems
Associated Products
Triton Concrete Hardener & Sealer
For application to the concrete surface to harden and seal surface, dust proof and increase surface abrasion resistance. Water based formulation, normally just one coat required. Typical applications include car parks, concrete bunding areas, and for hardening concrete that requires after trades. Also an effective anti lime coating to new concrete in cavity drain systems. Application by brush, broom or spray.
Trifix
Trifix is a two part epoxy resin sealant which can be used to seal unavoidable puncturing of the Tri-Seal membrane. Trifix can also be used where the bund is provided by metal angles.
Triton Fillet Seal
A pre-packed cement based and polymer modified product for use as a floor to wall junction seal during waterproofing works when using cementitious slurry coatings such as Triton TT55. In most circumstances, Fillet Seal need only be mixed with water for use. Where extra adhesion is required, Triton SBR may be used. Note: Where water is leaking or seeping the use of Triton Quick Set is advised.
The use of Fillet Seal helps to ensure a smooth transition between horizontal and vertical surfaces which minimises the risk of leaving gaps or holes unsealed during the waterproofing works.
Preparation:
Situations where the Fillet Seal will be employed should already have been prepared in accordance with the slurry coating or render specification. In the majority on instances, the Fillet Seal will be applied on to the slurry coated surface.
NB: Triton Fillet Seal is a pre-packed, cement based and polymer modified product for use as a floor to wall junction seal during waterproofing works when using cementitious slurry coatings and renders. Fillet Seal helps to ensure a smooth transition between horizontal and vertical surfaces which minimises the risk of leaving gaps or holes unsealed during the waterproofing works.
Triton Fillet Seal is available in 25 kg bags.